Print Server

This article describes how to connect a Windows 10 PC to a printer queue provided by the GWDG via gwdg-print3 is a server with Windows 2019 as its operating system. We recommend gwdg-print3 to users who are setting up a GWDG printer queue for the first time (e.g. on a new PC). If you have already set up GWDG printer queues using the old gwdg-print, there will be no change for you because these old printer queues will continue to work.

If you would like to set up a printer which is located in your office or institute, please have a look at Centrally managed institution printers

Howto install a GWDG printer queue on a Windows 10 Computer in GWDG's Active Directory

Click on the Windows logo in the bottom left corner to open the Start menu. Then click on the small “gear” to get to the settings.

Now click on “Devices”

and next on “Printers and scanners” in the left column.

Click on “Add a printer or scanner”.

Now, Windows is looking for new printers. But this won't be successfull here. So click on “The printer that I want isn't listed”.

In the next step, Windows offers you to “Find a printer by other options”. Choose “Select a shared printer by name”. As an example we want to add a printer called “color” on gwdg-print3. So please enter \\\color in the text field and click on “Next”.

Windows is downloading the printerdriver from gwdg-print3 now. When this ist done, click on “Next”

You can now print a testpage if you want. In the next step click on “Finish”.

Now you can see new printer as “color on”.
When the printer setup is done, it is a good idea to check which printer is the default printer now. Windows very often sets a new printer as the default printer. That's not always what you want. So it is a good idea to uncheck the box labled “Let Windows manage my default printer”,

Select the printer that you want as your default printer, click on “Manage”

and then on “Set as default”.

Howto install a GWDG printer queue on a Windows 10 Computer that is not in GWDG's Active Directory

The procedure is generally the same as described above.
If your computer is not a member of our Active Directory, Windows will ask for your user name and password when you try to connect to the print server. Enter gwdg\<YOUR_GWDG_ACCOUNT> as user name (e.g.: gwdg\tgwd1) and your password. Klick on “Remember my password”. Otherwise the printer you have just installed will not work after your next login.


Printjob to large

Our printserver uses the so called Line Printer Daemon Protocol to transmit print jobs. Internally, the size of a print job is stored as a 32-bit integer variable. With 32 bit integer you can only “count” up to 2GB. Larger print jobs might block the queue or produce an empty page. The only thing that helps is to delete the print job and reprint it in a lower resolution or split it into seperate documents.

My printer is not shown

Sometimes Windows 10 does not show all the installed printers on your PC. In this case press the winows key and “R” at the same time to run a command. Enter

and click on “OK” and restart your PC if necessary.

Special large format printer queues

In contrast to all other queues, the queues zcixls61, zcixls61, bcixls79, gcixls13, mcixls79 and pcixls13 are not equipped with the GWDGPS driver. There the “HP DesignJet Universal Print Driver PS3(v5.9.0)” is used. This driver offers more setting options and is therefore only intended for experienced users.

This driver offers a variety of predefined page formats in its print settings under Paper/Quality → Paper Options → Document Format → Other… (including B4 (ISO) to B0 (ISO), the US architect format Arch A to Arch E, JIS B4 to B0). You can also define your own page formats.

In the following, the queue zcixls61 is used to show how to define your own paper size (in this example 700×1000 mm). First connect the printer \\\zcixls61 and then have a look at the print settings. First of all, please check whether your print settings correspond to those in the above screenshot and adjust them if necessary. It is very important that “Use printer settings” is selected for “Paper source” and “Paper type”. The “Quick sets” should be set to “Factory defaults”. In the next step under “Document Format”, click on “Custom…” to create a new paper size. Select millimeters as the unit of measurement and enter 700 for width and 1000 for height under “Format”. Please note that new paper formats must always be created in portrait format. This also applies if you want to print in landscape format. The page format must not be wider than 1060 mm (even if the above window says otherwise). The paper roll used is only 42 inches wide (corresponding to 1067 mm), from which 7 mm of unprintable margin must be subtracted. Now give your paper format a meaningful name (e.g. 700x1000mm). When you are finished, click “Save” and then “OK” to return to the print settings. If you click on “Paper Options → Margins/Cutter: → Settings…”, you can determine how the print margins should be handled.

We recommend that you select “Oversize” as the “Margin arrangement”. This means that your printout will really be 700 x 1000 mm. At “Adjust” please activate “Draw cutting lines”. Then a thin, dashed frame is drawn around the image. This frame will be helpful when cutting the image (especially for posters with white background). Then click on “OK”.

Now the print settings will show “Printed on 700.00 x 1000.00 mm + margins”. Click on “OK” or “Apply” to apply these settings.

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies